XCS30XL

0RSpartan-XL 3.3V FPGA Automotive IQ Family: Introduction and Ordering0DS107-1 (v1.4) October 18, 20040Product SpecificationIntroductionThe Spartan™-XL 3.3V FPGA Automotive IQ product familyis a high-volume production FPGA solution that delivers allthe key requirements for ASIC replacement up to 40,000gates. These requirements include high-performance,on-chip RAM, core solutions, and prices that, in high vol-ume, approach and in many cases, are equivalent to maskprogrammed ASIC devices. By streamlining the Spartan-XLseries feature set, leveraging process technology andfocusing on total cost management, the Spartan-XL seriesdelivers the key features required by ASC and otherhigh-volume logic users while avoiding the initial cost, longdevelopment cycles, and inherent risk of conventionalASICs. •System level features-On-chip SelectRAM™ memory-Full readback capability for program verification and internal node observability-Dedicated high-speed carry logic-Internal 3-state bus capability-Eight global low-skew clock or signal networks-IEEE 1149.1-compatible Boundary Scan logic -Footprint compatibility in common packagesFully supported by powerful Xilinx development system-ISE Foundation™ Series: Integrated, shrink-wrap software-ISE Alliance Series™: Dozens of PC and workstation third party development systems supported-Fully automatic mapping, placement and routing3.3V supply for low power with 5V tolerant I/OsPower down inputHigher performanceFaster carry logicMore flexible high-speed clock networkLatch capability in Configurable Logic BlocksInput fast capture latchOptional mux or 2-input function generator on outputs12 mA or 24 mA output driveEnhanced Boundary ScanExpress Mode configuration

Refer to Spartan-XL and Spartan FPGAs complete data sheet (DS060) for product description, AC and DC specifications

Total Max.

Avail. Distributed No. of

Flip-flopsUser I/ORAM Bits3606161,1201,5362,016

77112160192224

3,2006,27212,80018,43225,088

•Features••••••

Guaranteed to meet full electrical specifications over TJ= –40°C to +125°C

ASIC replacement FPGA for high-volume production Iwith on-chip RAM

Density up to 1,862 logic cells or 40,000 system gatesStreamlined feature set based on XC4000 architectureBroad set of AllianceCORE™ and LogiCORE™ predefined solutions availableUnlimited reprogrammability

••••••••••••

Table 1: Spartan-XL Field Programmable Gate Arrays

Typical

LogicGate RangeMax System

(Logic and RAM)(1)DeviceCellsGates

XCS05XL2385,0002,000-5,000XCS10XL46610,0003,000-10,000XCS20XL95020,0007,000-20,000XCS30XL1,36830,00010,000-30,000XCS40XL1,86240,00013,000-40,000

CLB

Matrix10 x 1014 x 1420 x 2024 x 2428 x 28

TotalCLBs100196400576784

Notes:

1.Max values of Typical Gate Range include 20-30% of CLBs used as RAM.

© 2003 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and disclaimers are as listed at http://www.xilinx.com/legal.htm.

All other trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.

DS107-1 (v1.4) October 18, 2004Product Specificationwww.xilinx.com1-800-255-7778

1

Spartan-XL 3.3V FPGA Automotive IQ Family: Introduction and OrderingRDC SpecificationsSpartan-XL Absolute Maximum Ratings(1) SymbolVCCVINVTSTSTGTJDescription MinSupply voltage relative to GND(2)Input voltage relative to GND(2,3)Voltage applied to 3-state output(2,3)Storage temperature (ambient)Junction temperature–0.5–0.5–0.5–65-Max4.0VCC + 0.5VCC + 0.5+150+135UnitsVVV°C°CNotes: 1.Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time may affect device reliability.2.With 5V Tolerant I/Os selected, the Maximum DC overshoot must be limited to either +5.5V or 10 mA and undershoot (below GND) must be limited to either 0.5V or 10 mA, whichever is easier to achieve. 3.With 5V Tolerant I/Os selected, the Maximum AC (during transitions) conditions are as follows; the device pins may undershoot to –2.0V or overshoot to + 7.0V, provided this overshoot or undershoot lasts no more than 11 ns with a forcing current no greater than 100 mA.4.Without 5V Tolerant I/Os selected, the Maximum DC overshoot or undershoot must be limited to either 0.5V or 10 mA, whichever is easier to achieve. 5.Without 5V Tolerant I/Os selected, the Maximum AC conditions are as follows; the device pins may undershoot to –2.0V or overshoot to VCC + 2.0V, provided this overshoot or undershoot lasts no more than 11 ns with a forcing current no greater than 100mA.6.For soldering guidelines, see the Package Infomation on the Xilinx website.Spartan-XL Recommended Operating Conditions

SymbolTJVCCVIHVILTIN

Junction temperature

Supply voltage relative to GNDHigh-level input voltage(1)Low-level input voltage(1)Input signal transition time

Description

Min–403.050% of VCC0-+125

3.65.530% of VCC

250Max

Units°CVVVns

Notes:

1.Input and output measurement threshold is ~50% of VCC.

2

www.xilinx.com1-800-255-7778DS107-1 (v1.4) October 18, 2004

Product Specification

RSpartan-XL 3.3V FPGA Automotive IQ Family: Introduction and OrderingSpartan-XL Product AvailabilityTable2 shows the package and speed grades available forSpartan-XL family devices. Table3 shows the maximumuser I/Os available on the device and the number of userI/Os available for each device/package combination.Table 2: Spartan-XL Package and Speed Grade AvailabilityPinsTypeDeviceXCS05XLXCS10XLXCS20XLXCS30XLXCS40XLCode-4-4-4-4-4100Plastic VQFPVQ100QQQ--144Plastic TQFPTQ144--QQ-208Plastic PQFPPQ208--QQQ256Plastic BGABG256----QNotes: 1.Q = Automotive IQ, TJ = –40°C to +125°CTable 3: Spartan-XL User I/O ChartPackage Type

DeviceXCS05XLXCS10XLXCS20XLXCS30XLXCS40XL

Max I/O80112160192224

VQ100777777--TQ144--113113-PQ208--160169169BG256----205

DS107-1 (v1.4) October 18, 2004Product Specificationwww.xilinx.com1-800-255-7778

3

Spartan-XL 3.3V FPGA Automotive IQ Family: Introduction and OrderingROrdering Information Example:Device TypeSpeed GradeXCS20XL -4 PQ 208 QTemperature RangeNumber of PinsPackage TypeDevice Ordering Options Device XCS05XLXCS10XLXCS20XLXCS30XLXCS40XLSpeed Grade-4Standard PerformanceNumber of Pins / Package TypeVQ100100-pin Plastic Very Thin QFPTQ144144-pin Plastic Thin QFPPQ208208-pin Plastic QFPBG256256-ball Plastic BGATemperature Range (TJ)Q = Automotive IQ–40°C to +125°CRevision HistoryThe following table shows the revision history for this document.Date07/17/0202/03/0304/29/0306/14/0410/18/04

Version1.01.11.21.31.4

Initial Xilinx release.

Added reference to Spartan/XL data sheet in features.Updated VCC max from 7.0V to 4.0V.

Updated the XCS20XL, VQ100 cells of Table2 and Table3.Added \"Not to be used in new designs\" watermark; moved to \"Mature Products\"Description4

www.xilinx.com1-800-255-7778DS107-1 (v1.4) October 18, 2004

Product Specification